A swimming pool is a great addition to any home, but it can be a lot of work to keep it in good condition. If you’re thinking about refurbishing your pool, there are a few things you should keep in mind. In this blog post, we will explore how to refurbish a swimming pool. From cleaning the tile to fixing the plumbing, we will cover everything you need to do to get your pool looking like new again.
The first step is to test the water
If you’re thinking about refurbishing your swimming pool, the first step is to test the water. This will give you an idea of what needs to be done to get your pool back into shape.
There are a few things you need to test for: pH levels, chlorine levels, and alkalinity. You can buy testing kits at your local pool supply store or online. Once you have your results, you’ll know what needs to be adjusted.
It’s important to get the pH level in the correct range (between 7.2 and 7.6), because this will affect how effective the chlorine is in disinfecting the water. If the pH is too low, the chlorine won’t work as well. If it’s too high, it can cause skin and eye irritation.
The chlorine level should be between 1 and 3 ppm (parts per million). If it’s too low, there could be bacteria growing in the water. If it’s too high, it can cause skin irritation.
The alkalinity should be between 80 and 120 ppm. This helps to stabilize the pH level and prevents drastic changes that can occur with fluctuations in pH levels.
Once you’ve tested the water and adjusted the levels as needed, you’re ready to start cleaning your pool!
Next, you will need to vacuum the pool
Before you can do any work on the pool, you need to make sure that it is clean. The first step is to vacuum the pool. You will need to use a special vacuum attachment that fits over the return line of the pool. This will allow you to suction up all of the dirt and debris from the bottom of the pool. If you have a lot of debris, you may need to vacuum the pool more than once.
After that, you will need to brush the pool
After you have allowed the pool to dry, you will need to brush the entire pool surface with a stiff brush. Pay special attention to the tile line, as this is where most of the dirt and grime will build up. Once you have brushed the entire pool, you can vacuum it to remove any remaining debris.
Then you will need to clean the filter
If you have a cartridge filter, you will need to remove it and clean it with a hose. If you have a sand filter, you will need to backwash it.
Finally, you will need to add chlorine
Adding chlorine to your pool is an important part of the refurbishment process. Chlorine will help to keep your pool clean and free of bacteria. You will need to add chlorine to your pool on a regular basis, and you should test the chlorine levels in your pool frequently.
Leave a Reply